Internal erosion of chemically reinforced granular materials: a mathematical modeling approach     

Tony Khalil  Nadia Saiyouri  Bogdan Muresan  Pierre‐Yves Hicher 《国际地质力学数值与分析法杂志》2013,37(5):491-502

Internal erosion (IE) affects the stability of natural and reinforced materials by causing instability within their granular structure. The dislodgement and transport of eroded particles affect both the particulate concentration of eroding fluid and the pore network of eroded material. In this study, we examined these modifications using a transport model with a finite element code. First, IE tests on chemically reinforced sand columns were performed to obtain information about eroded material loss of mass, particulate concentration of effluent, porosity and permeability modifications, and existing IE stages. Second, based on experimental results, a mathematical one‐dimensional model has been formulated to monitor the evolution and spatial distribution of erodible solids, fluidized particles, porosity, permeability, and seepage stresses. The model consists of a set of coupled nonlinear differential equations solved in sequence. It provides valuable information about the extent and the dynamics of structural changes, which can be used to estimate an IE time for the hydraulic work to reach failure. Copyright © 2011 John Wiley & Sons, Ltd.  相似文献   

Finite element analysis of the effect of corrosion on the behavior of reinforced earth walls     

Truong‐Linh Chau  Emmanuel Bourgeois  Alain Corfdir 《国际地质力学数值与分析法杂志》2012,36(15):1741-1756

A simple model for the corrosion‐induced loss of stiffness and strength of the steel strips of earth‐reinforced walls was introduced in a finite element simulation of the long‐term behavior of the wall, in which the backfill‐strips interactions are taken into account by means of a generalized homogenization procedure (called a multiphase model). The results show an initial phase of slow displacements induced by the loss of stiffness, followed after a few decades by a steep acceleration of the displacements, leading to wall failure. The influences of the parameter controlling corrosion, the backfill cohesion and the heterogeneity of the corrosion process are discussed. Results are used to discuss a strategy for reinforced earth wall surveillance. Copyright © 2011 John Wiley & Sons, Ltd.  相似文献   

Modelling the flow of self‐compacting concrete     

S. Kulasegaram  B. L. Karihaloo  A. Ghanbari 《国际地质力学数值与分析法杂志》2011,35(6):713-723

A Lagrangian particle‐based method, smooth particle hydrodynamics (SPH), is used in this paper to model the flow of self‐compacting concretes (SCC) with or without short steel fibres. An incompressible SPH method is presented to simulate the flow of such non‐Newtonian fluids whose behaviour is described by a Bingham‐type model, in which the kink in the shear stress vs shear strain rate diagram is first appropriately smoothed out. The viscosity of the SCC is predicted from the measured viscosity of the paste using micromechanical models in which the second phase aggregates are treated as rigid spheres and the short steel fibres as slender rigid bodies. The basic equations solved in the SPH are the incompressible mass conservation and Navier–Stokes equations. The solution procedure uses prediction–correction fractional steps with the temporal velocity field integrated forward in time without enforcing incompressibility in the prediction step. The resulting temporal velocity field is then implicitly projected on to a divergence‐free space to satisfy incompressibility through a pressure Poisson equation derived from an approximate pressure projection. The results of the numerical simulation are benchmarked against actual slump tests carried out in the laboratory. The numerical results are in excellent agreement with test results, thus demonstrating the capability of SPH and a proper rheological model to predict SCC flow and mould‐filling behaviour. Copyright © 2010 John Wiley & Sons, Ltd.  相似文献   

水平加筋地基极限承载力的极限上限分析法     

曹文贵  谭建辉  胡卫东 《岩土力学》2018,39(6):1955-1962

水平加筋是广泛应用的软土地基处理方法之一,而水平加筋地基极限承载力的确定是其地基处理设计的重要依据。因此,首先结合条形基础下水平加筋地基的工程特点,在探讨其承载机制和破坏特点的基础上,考虑破坏间断面上筋材与地基土体的变形协调,构建出反映加筋参数变化影响的可变破坏模式及机动允许速度场;然后,在此基础上,通过重点研究筋材的能量耗散分析方法,并引入上限极限分析理论,建立出条形基础下水平加筋地基极限承载力分析模型,再引入序列二次规划优化分析理论,建立出条形基础下水平加筋地基极限承载力确定方法,它能充分反映加筋设计参数对地基破坏模式及承载力的影响;最后,通过试验结果与该方法及现有同类分析模型结果的比较分析,表明了该模型与方法的合理性与可行性。  相似文献   

潮湿环境中稻草的防腐效果及极限拉伸性能     

石茜  柴寿喜  李敏  魏丽 《吉林大学学报(地球科学版)》2011,41(1):200-206

滨海盐渍土存在盐胀、溶陷和吸湿软化等问题,需对其进行处理。设想使用高分子材料SH胶防腐处理稻草,以防腐后的稻草加筋滨海盐渍土。为评价浸胶稻草的防腐效果及其力学性能,测试了天然和浸泡SH胶稻草的吸水率,及天然、浸水、浸胶及浸胶后再浸海水稻草的极限拉力和极限延伸率。结果表明：（1）浸胶稻草与天然稻草相比,吸水率最多可降低50%,证实防腐效果较好;（2）浸胶后,稻草的极限延伸率和极限拉力最大提高了26%和23%;（3）同是浸泡在海水中,浸胶后稻草较天然稻草,其极限延伸率和极限拉力的最大增长率为12%和11%;（4）浸胶稻草的SEM照片观察及能谱分析表明,SH胶包裹了纤维并进入到稻草的孔隙中,增强了纤维间的联结,提高了稻草的极限抗拉性能。SH胶防腐后的稻草作为加筋材料是可行的。  相似文献   

加肋土工膜与砂土界面特性研究   总被引：1，自引：1，他引：0  

高俊丽  张孟喜  张文杰 《岩土力学》2011,32(11):3225-3230

高密度聚乙烯（high-density polyethylene,简称HDPE）土工膜与土之间的抗剪强度较低是填埋场沿底部衬垫失稳的一个重要的原因。尽管糙面土工膜与黏土之间的摩擦系数较大,但随着应力积累,糙面土工膜很容易被拉裂,或者由于表面的颗粒被磨掉而使界面摩擦性能降低。在传统土工膜的基础上,提出了一种非满布单层加肋土工膜,并进行大量的界面直剪试验,研究在不同正应力和加肋间距下土工膜与砂土之间的界面特性、强度特性。试验结果表明,条状土工膜提高的是黏聚力,其内摩擦角有所下降,而块状土工膜黏聚力和内摩擦角都有很大程度的提高;随着加肋间距的减小,黏聚力逐渐的增大,而内摩擦角超过一定值后,又随着加肋间距的增加逐渐减小,这说明加肋间距存在一个最优值。加肋土工膜相比于光面土工膜、糙面土工膜,在提高界面抗剪强度的同时,依旧保持其较好抗拉裂性能,是一种较好的新型土工合成材料。  相似文献   

组合式面板双绞合六边形钢丝网加筋土挡墙现场试验研究     

刘泽  黄向京  杨果林 《岩土力学》2011,32(11):3295-3300

为研究双绞合六边形钢丝网加筋土挡墙的受力、变形特性,对潭衡（湘潭－衡阳）西线高速公路K124+340断面组合式面板双绞合六边形钢丝网加筋土挡墙进行了现场试验,测试了竖向土压力、水平土压力、筋材拉应变分布规律和格宾箱变形规律。结果表明：在筋材长度方向上,竖向土压力在挡墙下部呈双峰型分布,而在上部呈单峰形分布;墙背水平土压力沿墙高呈非线性分布,最大值发生在墙高约1.5 m处,实测水平土压力小于主动压力;筋材应变在筋长方向上呈非线性分布,各层筋材的应变分布模式不相同;筋材的变形主要发生在施工期,格宾箱的变形呈鼓胀式  相似文献   

加筋土边坡临界滑动场     

李强  朱大勇 《地震学刊》2010,(4):431-434

在分析加筋土边坡稳定性时,将加筋材料的作用视为施加于滑面上的等效力,建立了满足力平衡的加筋土边坡安全系数的计算格式;将边坡临界滑动场数值模拟方法进行推广,提出了基于力平衡的加筋土边坡临界滑动场计算方法,可以得到形状任意的临界滑动面及边坡最小安全系数。通过算例,比较加筋前后临界滑动面和安全系数的变化,并探讨了加筋水平间距、强度、长度对加筋土边坡稳定性的影响。  相似文献   

Shake table study on an ordinary low‐rise building seismically isolated with SU‐FREIs (stable unbonded‐fiber reinforced elastomeric isolators)     

Hamid Toopchi‐Nezhad  Michael J. Tait  Robert G. Drysdale 《地震工程与结构动力学》2009,38(11):1335-1357

This paper reports on the investigation of novel fiber reinforced elastomeric isolator (FREI) bearings, which do not have thick end plates, and are used in an unbonded application. Owing to the stable lateral load‐displacement response exhibited by the unbonded FREI bearings, the proposed bearings are referred to as stable unbonded (SU)‐FREIs. A shake table test program was conducted on a two‐story test‐structure having well‐defined elastic response characteristics. Compared with the results for the corresponding fixed base (FB) structure, the peak response values, distribution of lateral response throughout the height of the structure, and response time histories of the tested base isolated (BI) structure indicate that significantly improved response can be achieved. This study clearly indicates that SU‐FREI bearings can provide an effective seismic isolation system. Copyright © 2009 John Wiley & Sons, Ltd.  相似文献   

工业CT在增强硬质聚氨酯泡沫塑料无损检测中的应用     

杨存丰  李敬明  田勇  张伟斌  戴斌 《CT理论与应用研究》2009,18(3)

为提高作为结构材料使用时硬质聚氨酯泡沫塑料(RPUF)的力学性能,在基体材料中添加增强材料形成了增强RPUF(RRPUF),RRPUF内部的材料组成及结构特征影响其力学性能.本文应用微焦点锥束体式工业CT技术,进行了玻璃纤维RRPUF三维结构的工业CT检测,获得了高分辨率的RRPUF三维结构CT图像,并解析了RRPUF内部结构特征,包括玻璃纤维及泡孔的形状、位置、尺寸、体积含量以及分布状况等.研究表明微焦点VCT技术可有效地实现RRPUF内部结构特征的检测及分析,为进一步研究RRPUF的性能提供了重要方法.  相似文献